Resin Sphere Paperweight Calculator
Estimate total volume, specific gravity, and mix weights for resin sphere paperweights. Prevent thermal cracking. Adjust the parameters in the interactive workbench below to get immediate recipe card outputs.
Resin Volume Estimator
Scale from 1 prototype to full production run
MEASUREMENT OUTPUTS
Recipe & Batch Summary
Studio Batch of 1 piece of sphere mold (DIAMETER 10cm x DEPTH / HEIGHT 2cm) using Generic Epoxy: • Per Single Unit: 316.8g Resin (A) + 316.8g Hardener (B) [Total: 633.6g]. • Total Studio Run (1 Units): 316.8g Resin (A) + 316.8g Hardener (B) [Total Mass: 633.6g]. • Mix Ratio: 1:1 | Safety Margin: 10%.
MakerRatio • Studio Workshop Batch Sheet
https://makerratio.com • Precision Craft Formula Record
Date: _______________
Batch #: ____________
Project: Generic Epoxy (sphere x 1)
Category: Epoxy Resin
Dimensions: sphere (x1)
Mix Ratio: 1:1 | Batch: 1 unit(s)
Specific Gravity: 1.1 g/ml
Safety Spill Margin: 10%
Batch Mix Breakdown (By Exact Weight)
Workshop Safety & Quality Protocol:
[ ] Ambient room temp 70°F–78°F (21°C–25°C) & mold leveled.
[ ] Protective nitrile gloves on & workspace ventilation active.
[ ] Mix thoroughly scraping sides and bottom for 3 full minutes.
[ ] Verify pot life and demold window per manufacturer TDS.
Curing Schedule Log:
Pour Time: ___________
Gel / Tack-Free: ______
Demold Time: ________
Recommended Materials & Tools for this Project
3D Sphere Silicone Mold Kit (Multiple Sizes)
Specification: High-transparency flexible silicone molds for casting crystal-clear resin paperweights and orb pendants.
LET'S RESIN 2:1 Deep Pour Epoxy Kit
Formula: 2:1 mix ratio by volume/weight. Formulated for deep single pours up to 2–4 inches per layer with low viscosity self-degassing.
Transparency Notice: As an Amazon Associate, MakerRatio earns from qualifying purchases at zero extra cost to you. Product recommendations are selected based on verified Manufacturer Technical Data Sheets (TDS). Always consult chemical safety data before pouring.
Embed This Calculator on Your Blog or Shop Website
Allow your readers or craft customers to calculate exact material ratios directly on your website. Free, responsive, and easy to copy.
<iframe src="https://makerratio.com/resin/sphere-paperweight-calculator/" width="100%" height="650" frameborder="0" style="border-radius:16px; border:1px solid #1e293b;" title="Resin Sphere Paperweight Calculator"></iframe><p style="font-size:12px; text-align:center; margin-top:8px;">Powered by <a href="https://makerratio.com/resin/sphere-paperweight-calculator/" target="_blank" rel="noopener">MakerRatio Craft Calculators</a></p>Calculation Logic & Engineering Formula
To calculate the exact volume and weight splits for this craft project, the workbench executes the following geometric equations:
Sphere Orb Mold Volume & Exotherm Guide
Core Heat Risk AnalysisVolume math, resin weight, and exotherm temperature risk ratings across standard botanical preservation sphere diameters.
| Sphere Diameter (Inches / cm) | Geometric Volume (ml) | Mixed Resin Weight (g) | Recommended Resin Type | Max Safe Pour Depth | Exotherm Heat Risk |
|---|---|---|---|---|---|
| 1.5" Mini Orb (3.8 cm) | 28.7 ml | 31.6 g (1.11 oz) | 1:1 Fast Casting | Single Pour (1.5") | Very Low |
| 2.0" Standard Sphere (5.1 cm) | 69.4 ml | 76.3 g (2.69 oz) | 1:1 Tabletop / Casting | Single Pour (2.0") | Low |
| 2.5" Golf Ball Orb (6.4 cm) | 137.3 ml | 151.0 g (5.33 oz) | 2:1 Deep Pour | Single Pour (2.5") | Moderate |
| 3.0" Flower Preservation (7.6 cm) | 230.0 ml | 248.4 g (8.76 oz) | 2:1 or 3:1 Deep Pour | Single Pour (3.0") | High (Use Deep Pour) |
| 3.5" Large Floral Dome (8.9 cm) | 369.0 ml | 398.5 g (14.06 oz) | 2:1 or 3:1 Deep Pour | Single Pour (3.5") | High (Slow cure) |
| 4.0" Statement Paperweight (10.2 cm) | 555.6 ml | 600.0 g (21.16 oz) | 3:1 Deep Pour Only | Single or 2 Layers | Severe (Flash cure risk) |
| 5.0" Giant Botanical Orb (12.7 cm) | 1,072.5 ml | 1,158.3 g (40.86 oz) | 3:1 Deep Pour Only | 2 Layers Recommended | Extreme Exotherm |
In-Depth Crafting Guide & Density Analysis
Sphere paperweights and orbs are among the most popular resin art projects, frequently used for wedding bouquet preservation and natural specimen encapsulation. Because spheres have the lowest surface-area-to-volume ratio of any 3D shape, heat concentrates intensely in the geometric core.
This sphere resin calculator computes exact spherical volume based on diameter, accounts for deep-pour densities, and recommends safe layer depths to prevent flash-curing and internal fractures.
Frequently Asked Questions (Sphere Paperweight Resin Calculator)
Why do spheres have the highest risk of thermal runaway (boiling and cracking)?
A sphere has the lowest surface-area-to-volume ratio of any 3D geometric shape. Heat generated during cross-linking cannot escape through the exterior walls and concentrates in the core, causing temperatures to spike above 300°F if poured with fast 1:1 tabletop epoxy.
How do you eliminate bubbles inside a large flower preservation resin sphere?
(1) Use a slow-curing 2:1 or 3:1 deep-pour resin, (2) warm resin bottles in water before mixing, (3) pour in a thin ribbon down the mold side, and (4) cure inside a pressure pot pressurized to 40–45 PSI.
How do you fix the flat spot at the top fill hole of a sphere silicone mold?
Overfill the small hole opening slightly so surface tension creates a dome. After curing, sand the small nub flat starting at 120-grit up to 3,000-grit, and polish with automotive compound, or dome it with UV resin.
How much resin is required for a 3-inch (7.6 cm) sphere paperweight?
A 3-inch sphere has a volume of 230 ml and requires 248.4 grams of mixed deep pour epoxy (165.6g Part A + 82.8g Part B for a 2:1 system).
Can fresh wedding flowers be placed directly into a resin sphere?
No. Fresh flowers contain moisture, which turns brown, rots, and reacts with epoxy to create permanent milky cloudiness. Flowers must be completely dried in silica gel crystals for 3 to 7 days before casting.
Other Calculators in the RESIN Suite
Explore other specialized volume, density, and cost estimators built for makers: